Electrosynthesis of iminophosphoranes and applications in nickel catalysis.

P(v) iminophosphorane compounds are accessed via electrochemical oxidation of commercially available P(iii) phosphines, including mono-, di- and tri-dentate phosphines, as well as chiral phosphines. The reaction uses inexpensive bis(trimethylsilyl)carbodiimide as an efficient and safe aminating reagent. DFT calculations, cyclic voltammetry, and NMR studies provide insight into the reaction mechanism. The proposed mechanism reveals a special case of sequential paired electrolysis. DFT calculations of the frontier orbitals of an iminophosphorane are compared with those of the analogous phosphines and phosphine oxides. X-ray crystallographic studies of the ligands as well as a Ni-coordination complex provide structural insight for these ligands. The utility of these iminophosphoranes as ligands is demonstrated in nickel-catalyzed cross-electrophile couplings including C(sp2)-C(sp3) and C(sp2)-C(sp2) couplings, an electrochemically driven C-N cross-coupling, and a photochemical arylative C(sp3)-H functionalization. In some cases, these new ligands provide improved performance over commonly used sp2-N-based ligands (e.g. 4,4'-di-tert-butyl-2,2'-bipyridine).

Accelerating Pharmaceutical Process Development with an Acoustic Droplet Ejection-Multiple Reaction Monitoring-Mass Spectrometry Workflow.

Fast-paced pharmaceutical process developments (e.g., high-throughput experimentation, directed evolution, and machine learning) involve the introduction of fast, sensitive, and accurate analytical assays using limited sample volumes. In recent years, acoustic droplet ejection (ADE) coupled with an open port interface has been invented as a sampling technology for mass spectrometry, providing high-throughput nanoliter analytical measurements directly from the standard microplates. Herein, we introduce an ADE-multiple reaction monitoring-mass spectrometry (ADE-MRM-MS) workflow to accelerate pharmaceutical process research and development (PR&D). This systematic workflow outlines the selection of MRM transitions and optimization of assay parameters in a data-driven manner using rapid measurements (1 sample/s). The synergy between ADE sampling and MRM analysis enables analytical assays with excellent sensitivity, selectivity, and speed for PR&D reaction screenings. This workflow was utilized to develop new ADE-MRM-MS assays guiding a variety of industrial processes, including (1) screening of Ni-based catalysts for C-N cross-coupling reaction at 1 Hz and (2) high-throughput regioisomer analysis-enabled enzyme library screening for peptide ligation reaction. ADE-MRM-MS assays were demonstrated to deliver accurate results that are comparable to conventional liquid chromatography (LC) experiments while providing >100-fold throughput enhancement.

High-Throughput Determination of Stern-Volmer Quenching Constants for Common Photocatalysts and Quenchers.

Mechanistic information on reactions proceeding via photoredox catalysis has enabled rational optimizations of existing reactions and revealed new synthetic pathways. One essential step in any photoredox reaction is catalyst quenching via photoinduced electron transfer or energy transfer with either a substrate, additive, or cocatalyst. Identification of the correct quencher using Stern-Volmer studies is a necessary step for mechanistic understanding; however, such studies are often cumbersome, low throughput and require specialized luminescence instruments. This report describes a high-throughput method to rapidly acquire a series of Stern-Volmer constants, employing readily available fluorescence plate readers and 96-well plates. By leveraging multichannel pipettors or liquid dispensing robots in combination with fast plate readers, the sampling frequency for quenching studies can be improved by several orders of magnitude. This new high-throughput method enabled the rapid collection of 220 quenching constants for a library of 20 common photocatalysts with 11 common quenchers. The extensive Stern-Volmer constant table generated greatly facilitates the systematic comparison between quenchers and can provide guidance to the synthetic community interested in designing and understanding catalytic photoredox reactions.

Quinone-mediated hydrogen anode for non-aqueous reductive electrosynthesis.

Electrochemical synthesis can provide more sustainable routes to industrial chemicals1-3. Electrosynthetic oxidations may often be performed 'reagent-free', generating hydrogen (H2) derived from the substrate as the sole by-product at the counter electrode. Electrosynthetic reductions, however, require an external source of electrons. Sacrificial metal anodes are commonly used for small-scale applications4, but more sustainable options are needed at larger scale. Anodic water oxidation is an especially appealing option1,5,6, but many reductions require anhydrous, air-free reaction conditions. In such cases, H2 represents an ideal alternative, motivating the growing interest in the electrochemical hydrogen oxidation reaction (HOR) under non-aqueous conditions7-12. Here we report a mediated H2 anode that achieves indirect electrochemical oxidation of H2 by pairing thermal catalytic hydrogenation of an anthraquinone mediator with electrochemical oxidation of the anthrahydroquinone. This quinone-mediated H2 anode is used to support nickel-catalysed cross-electrophile coupling (XEC), a reaction class gaining widespread adoption in the pharmaceutical industry13-15. Initial validation of this method in small-scale batch reactions is followed by adaptation to a recirculating flow reactor that enables hectogram-scale synthesis of a pharmaceutical intermediate. The mediated H2 anode technology disclosed here offers a general strategy to support H2-driven electrosynthetic reductions.

Pentacenones as Divergent Intermediates to Unsymmetrically Substituted Pentacenes: Synthesis and Crystallographic Analysis.

We report a general method for the desymmetrization of 6,13-pentacenequinone to access ethynylated pentacene ketones, namely, 13-hydroxy-13-(ethynylated)pentacene-6(13H)-ones. These pentacene ketones ("pentacenones") serve as divergent intermediates to unsymmetrically 6,13-disubstituted pentacenes, commonly used for studying singlet fission processes and charge transport phenomena in organic field effect transistors. We report a synthetic method to access pentacenones, which utilizes a precipitation/crystallization from the crude mixture to enable facile purification on a multigram scale. X-ray crystallographic analysis of the pentacenones reveals key noncovalent interactions that contribute to the crystallization, specifically, hydrogen bonding between the ketone and alcohol functional groups as well as π-π-stacking and dipole-dipole interactions.

Parallel versus Twisted Pentacenes: Conformational Impact on Singlet Fission.

We placed two pentacene chromophores at the termini of a diacetylene linker to investigate the impact of excitation wavelength, conformational flexibility, and vibronic coupling on singlet fission. Photoexcitation of the low-energy absorption results in a superposed mixture of states, which transform on an ultrafast time-scale into a spin-correlated and vibronically coupled/hot delocalized triplet pair 1(T1T1)deloc. Regardless of temperature, the lifetime for 1(T1T1)deloc is less than 2 ps. In contrast, photoexcitation of the high-energy absorption results in the formation of 1(T1T1)deloc lasting 1.0 ps, which then decays at room temperature within 4 ps via triplet-triplet annihilation. Lowering the temperature enables 1(T1T1)deloc to delocalize and vibronically decouple, in turn affording 1(T1T1)loc. In addition, our results suggest that the quasi-free rotation at the diacetylene spacer may lead to twisted conformations with very low SF quantum yields, highlighting the need of controlling this structural aspect in the design of new singlet fission active molecules.

Efficient Aliphatic Hydrogen-Isotope Exchange with Tritium Gas through the Merger of Photoredox and Hydrogenation Catalysts.

Employment of a combination of an organophotoredox catalyst with Wilkinson's catalyst (Rh(PPh3)3Cl) has given rise to an unprecedented method for hydrogen-isotope exchange (HIE) of aliphatic C(sp3)-H bonds of complex pharmaceuticals using T2 gas directly. Wilkinson's catalyst, commonly used for catalytic hydrogenations, was exploited as a precatalyst for activation of D2 or T2 and hydrogen atom transfer. In this combined methodology and mechanistic study, we demonstrate that by coupling photocatalysis with Rh catalysis, carbon-centered radicals generated via photoredox catalysis can be intercepted by Rh-hydride intermediates to deliver an effective hydrogen atom donor for hydrogen-isotope labeling of complex molecules in one step. By optimizing the ratio of the photocatalyst and Wilkinson's catalyst to balance the rate of the dual catalytic cycles, we can achieve efficient HIE and high recovery yield. This protocol was readily applied to direct HIE of C(sp3)-H bonds in 10 complex drug molecules, showing high isotope incorporation efficiency and exceptionally good functional group tolerance and demonstrating this approach as a practical and attractive labeling method for deuteration and tritiation.

Electrochemically driven cross-electrophile coupling of alkyl halides.

Recent research in medicinal chemistry has suggested that there is a correlation between an increase in the fraction of sp3 carbons-those bonded to four other atoms-in drug candidates and their improved success rate in clinical trials1. As such, the development of robust and selective methods for the construction of carbon(sp3)-carbon(sp3) bonds remains a critical problem in modern organic chemistry2. Owing to the broad availability of alkyl halides, their direct cross-coupling-commonly known as cross-electrophile coupling-provides a promising route towards this objective3-5. Such transformations circumvent the preparation of carbon nucleophiles used in traditional cross-coupling reactions, as well as stability and functional-group-tolerance issues that are usually associated with these reagents. However, achieving high selectivity in carbon(sp3)-carbon(sp3) cross-electrophile coupling remains a largely unmet challenge. Here we use electrochemistry to achieve the differential activation of alkyl halides by exploiting their disparate electronic and steric properties. Specifically, the selective cathodic reduction of a more substituted alkyl halide gives rise to a carbanion, which undergoes preferential coupling with a less substituted alkyl halide via bimolecular nucleophilic substitution to forge a new carbon-carbon bond. This protocol enables efficient cross-electrophile coupling of a variety of functionalized and unactivated alkyl electrophiles in the absence of a transition metal catalyst, and shows improved chemoselectivity compared with existing methods.

Benzylic Photobromination for the Synthesis of Belzutifan: Elucidation of Reaction Mechanisms Using In Situ LED-NMR.

A detailed mechanistic understanding of a benzylic photobromination en route to belzutifan (MK-6482, a small molecule for the treatment of renal cell carcinoma associated with von Hippel-Lindau syndrome) has been achieved using in situ LED-NMR spectroscopy in conjunction with kinetic analysis. Two distinct mechanisms of overbromination, namely, the ionic and radical pathways, have been revealed by this study. The behavior of the major reaction species, including reactants, intermediates, products, and side products, has been elucidated. Comprehensive understanding of both pathways informed and enabled mitigation of a major process risk: a sudden product decomposition. Detailed knowledge of the processes occurring during the reaction and their potential liabilities enabled the development of a robust photochemical continuous flow process implemented for commercial manufacturing.

Photons or Electrons? A Critical Comparison of Electrochemistry and Photoredox Catalysis for Organic Synthesis.

Redox processes are at the heart of synthetic methods that rely on either electrochemistry or photoredox catalysis, but how do electrochemistry and photoredox catalysis compare? Both approaches provide access to high energy intermediates (e.g., radicals) that enable bond formations not constrained by the rules of ionic or 2 electron (e) mechanisms. Instead, they enable 1e mechanisms capable of bypassing electronic or steric limitations and protecting group requirements, thus enabling synthetic chemists to disconnect molecules in new and different ways. However, while providing access to similar intermediates, electrochemistry and photoredox catalysis differ in several physical chemistry principles. Understanding those differences can be key to designing new transformations and forging new bond disconnections. This review aims to highlight these differences and similarities between electrochemistry and photoredox catalysis by comparing their underlying physical chemistry principles and describing their impact on electrochemical and photochemical methods.

Unlocking the Potential of High-Throughput Experimentation for Electrochemistry with a Standardized Microscale Reactor.

Organic electrochemistry has emerged as an enabling and sustainable technology in modern organic synthesis. Despite the recent renaissance of electrosynthesis, the broad adoption of electrochemistry in the synthetic community, and especially in industrial settings, has been hindered by the lack of general, standardized platforms for high-throughput experimentation (HTE). Herein, we disclose the design of the HTe - Chem, a high-throughput microscale electrochemical reactor that is compatible with existing HTE infrastructure and enables the rapid evaluation of a broad array of electrochemical reaction parameters. Utilizing the HTe - Chem to accelerate reaction optimization, reaction discovery, and chemical library synthesis is illustrated using a suite of oxidative and reductive transformations under constant current, constant voltage, and electrophotochemical conditions.

Synthesis of Sterically Hindered Primary Amines by Concurrent Tandem Photoredox Catalysis.

Primary amines are an important structural motif in active pharmaceutical ingredients (APIs) and intermediates thereof, as well as members of ligand libraries for either biological or catalytic applications. Many chemical methodologies exist for amine synthesis, but the direct synthesis of primary amines with a fully substituted α carbon center is an underdeveloped area. We report a method which utilizes photoredox catalysis to couple readily available O-benzoyl oximes with cyanoarenes to synthesize primary amines with fully substituted α-carbons. We also demonstrate that this method enables the synthesis of amines with α-trifluoromethyl functionality. Based on experimental and computational results, we propose a mechanism where the photocatalyst engages in concurrent tandem catalysis by reacting with the oxime as a triplet sensitizer in the first catalytic cycle and a reductant toward the cyanoarene in the second catalytic cycle to achieve the synthesis of hindered primary amines via heterocoupling of radicals from readily available oximes.

Electrochemical Synthesis of Hindered Primary and Secondary Amines via Proton-Coupled Electron Transfer.

Accessing hindered amines, particularly primary amines α to a fully substituted carbon center, is synthetically challenging. We report an electrochemical method to access such hindered amines starting from benchtop-stable iminium salts and cyanoheteroarenes. A wide variety of substituted heterocycles (pyridine, pyrimidine, pyrazine, purine, azaindole) can be utilized in the cross-coupling reaction, including those substituted with a halide, trifluoromethyl, ester, amide, or ether group, a heterocycle, or an unprotected alcohol or alkyne. Mechanistic insight based on DFT data, as well as cyclic voltammetry and NMR spectroscopy, suggests that a proton-coupled electron-transfer mechanism is operational as part of a hetero-biradical cross-coupling of α-amino radicals and radicals derived from cyanoheteroarenes.

Discovery of a Photoinduced Dark Catalytic Cycle Using in Situ LED-NMR Spectroscopy.

We report the use of LED-NMR spectroscopy to study the reaction mechanism of a newly discovered photoinduced iron-catalyzed cycloisomerization of alkynols to cyclic enol ethers. By understanding on/off ligand binding to the catalyst, we were able to appropriately design reaction conditions to balance catalyst activity and stability. LED-NMR was demonstrated to be a powerful tool in elucidating reaction mechanisms of photochemical reactions. Temporal NMR spectroscopic data under visible light illumination (1) revealed the pre-catalyst activation mechanism, (2) proved that photon flux provides a unique external control of the equilibrium distribution between the pre-catalyst and active catalyst, and ultimately the rate of reaction, (3) provided information about the reaction driving forces and the turnover-limiting step, and (4) enabled both real-time structural and kinetic insights into elusive species (e.g., dissolved gases).

Alkyne Benzannulation Reactions for the Synthesis of Novel Aromatic Architectures.

Aromatic compounds and polymers are integrated into organic field effect transistors, light-emitting diodes, photovoltaic devices, and redox-flow batteries. These compounds and materials feature increasingly complex designs, and substituents influence energy levels, bandgaps, solution conformation, and crystal packing, all of which impact performance. However, many polycyclic aromatic hydrocarbons of interest are difficult to prepare because their substitution patterns lie outside the scope of current synthetic methods, as strategies for functionalizing benzene are often unselective when applied to naphthalene or larger systems. For example, cross-coupling and nucleophilic aromatic substitution reactions rely on prefunctionalized arenes, and even directed metalation methods most often modify positions near Lewis basic sites. Similarly, electrophilic aromatic substitutions access single regioisomers under substrate control. Cycloadditions provide a convergent route to densely functionalized aromatic compounds that compliment the above methods. After surveying cycloaddition reactions that might be used to modify the conjugated backbone of poly(phenylene ethynylene)s, we discovered that the Asao-Yamamoto benzannulation reaction is notably efficient. Although this reaction had been reported a decade earlier, its scope and usefulness for synthesizing complex aromatic systems had been under-recognized. This benzannulation reaction combines substituted 2-(phenylethynyl)benzaldehydes and substituted alkynes to form 2,3-substituted naphthalenes. The reaction tolerates a variety of sterically congested alkynes, making it well-suited for accessing poly- and oligo(ortho-arylene)s and contorted hexabenzocoronenes. In many cases in which asymmetric benzaldehyde and alkyne cycloaddition partners are used, the reaction is regiospecific based on the electronic character of the alkyne substrate. Recognizing these desirable features, we broadened the substrate scope to include silyl- and halogen-substituted alkynes. Through a combined experimental and computational approach, we have elucidated mechanistic insight and key principles that govern the regioselectivity outcome of the benzannulation of structurally diverse alkynes. We have applied these methods to prepare sterically hindered, shape-persistent aromatic systems, heterocyclic aromatic compounds, functionalized 2-aryne precursors, polyheterohalogenated naphthalenes, ortho-arylene foldamers, and graphene nanoribbons. As a result of these new synthetic avenues, aromatic structures with interesting properties were uncovered such as ambipolar charge transport in field effect transistors based on our graphene nanoribbons, conformational aspects of ortho-arylene architectures resulting from intramolecular π-stacking, and modulation of frontier molecular orbitals via protonation of heteroatom containing aromatic systems. Given the availability of many substituted 2-(phenylethynyl)benzaldehydes and the regioselectivity of the benzannulation reaction, naphthalenes can be prepared with control of the substitution pattern at seven of the eight substitutable positions. Researchers in a range of fields are likely to benefit directly from newly accessible molecular and polymeric systems derived from polyfunctionalized naphthalenes.

Rapid access to substituted 2-naphthyne intermediates via the benzannulation of halogenated silylalkynes.

Aryne intermediates are versatile and important reactive intermediates for natural product and polymer synthesis. 2-Naphthynes are relatively unexplored because few methods provide precursors to these intermediates, especially for those bearing additional substituents. Here we report a general synthetic strategy to access 2-naphthyne precursors through an Asao-Yamamoto benzannulation of ortho-(phenylethynyl)benzaldehydes with halo-silylalkynes. This transformation provides 2-halo-3-silylnaphthalenes with complete regioselectivity. These naphthalene products undergo desilylation/dehalogenation in the presence of F- to generate the corresponding 2-naphthyne intermediate, as evidenced by furan trapping experiments. When these 2-naphthynes are generated in the presence of a copper catalyst, ortho-naphthalene oligomers, trinaphthalene, or binaphthalene products are formed selectively by varying the catalyst loading and reaction temperature. The efficiency, mild conditions, and versatility of the naphthalene products and naphthyne intermediates will provide efficient access to many new functional aromatic systems.

Diazatetracenes Derived from the Benzannulation of Acetylenes: Electronic Tuning via Substituent Effects and External Stimuli.

Functionalized diazatetracenes are prepared using a new two-step sequence. The use of a dichlorobenzaldehyde in a Cu-catalyzed benzannulation of acetylenes provides functionalized dichloronaphthalenes that afford diazatetracenes using Buchwald-Hartwig aminations. This approach provides unique substitution patterns and rapid access to covalently linked dimeric diazatetracenes. Their electronic properties are characterized by UV-vis absorption/emission and cyclic voltammetry, revealing strong effects from both external stimuli by acid and internal substituent effects.

Tautomerization and Dimerization of 6,13-Disubstituted Derivatives of Pentacene.

Two new 6,13-disubstituted pentacene derivatives, 1 c and 1 d, with alkyl and triisopropylsilylethynyl substitution have been synthesized and characterized experimentally and computationally. The alkyl substituted 1 c and 1 d represent the first 6-alkyl-substituted pentacene derivative where the fully aromatic species dominates over the corresponding tautomer. Indeed, no tautomerization product is found for either 1 c or 1 d upon heating or in the presence of catalytic amounts of acid. On the other hand, an unexpected dimer (3 c) is formed from 1 c. A plausible mechanism for this new dimerization process of the 6-methyl-substituted pentacene derivative 1 c is proposed, which involves first a bimolecular hydrogen atom transfer followed by an intramolecular [4+2] Diels-Alder cycloaddition. In the case of 6-butyl substitution, neither tautomerization nor dimerization is observed. Computations support the proposed 1 c dehydrodimerization pathway, explain why 1 d does not dimerize, and show the importance of the nature of the group at C-13 in controlling the relative stability of 6-alkyl-substituted pentacene tautomers.

Reductive Aromatization/Dearomatization and Elimination Reactions to Access Conjugated Polycyclic Hydrocarbons, Heteroacenes, and Cumulenes.

Acenes, heteroacenes, conjugated polycyclic hydrocarbons, and polycyclic aromatic hydrocarbons (collectively referred to in this review as conjugated polycyclic molecules, CPMs) have fascinated chemists since they were first isolated and synthesized in the mid 19th century. Most recently, these compounds have shown significant promise as the active components in organic devices (e.g., solar cells, thin-film transistors, light-emitting diodes, etc.), and, since 2001, a plethora of publications detail synthetic strategies to produce CPMs. In this review, we discuss reductive aromatization, reductive dearomatization, and elimination/extrusion reactions used to form CPMs. After a brief discussion on early methods to synthesize CPMs, we detail the use of reagents used for the reductive (de)aromatization of precursors containing 1,4-diols/diethers, including SnCl2 and iodide (I- ). Extension of these methods to carbomers and cumulenes is briefly discussed. We then describe low-valent metal species used to reduce endoxides to CPMs, and discuss the methods to directly reduce acenediones and acenones to the respective acene. In the final section, we describe methods used to affect aromatization to the desired CPM via extrusion of small, volatile molecules.

Mechanism-Guided Development of a Highly Active Bis-thiourea Catalyst for Anion-Abstraction Catalysis.

We describe the rational design of a linked, bis-thiourea catalyst with enhanced activity relative to monomeric analogues in a representative enantioselective anion-abstraction reaction. Mechanistic insights guide development of this linking strategy to favor substrate activation though the intramolecular cooperation of two thiourea subunits while avoiding nonproductive aggregation. The resulting catalyst platform overcomes many of the practical limitations that have plagued hydrogen-bond-donor catalysis and enables use of catalyst loadings as low as 0.05 mol %. Computational analyses of possible anion-binding modes provide detailed insight into the precise mechanism of anion-abstraction catalysis with this pseudo-dimeric thiourea.